Users Manual

SME VOIP SYSTEM GUIDE 1.1 68 | P a g e
Proprietary and Confidential
5.14 Repeaters
Within this section we describe the repeater parameter, and how to operate the repeater.
Add repeater
Before registering a repeater to the system, the user first needs to add it. To do so, select Add Repeater from the
repeater’s web menu and fill in the data defined by the table below
Screenshot
PARAMETERS DESCRIPTION
NAME
Repeater name. If no
name specified, the field will be empty
DECT SYNC MODE Manually: User controlled by manually assign “Repeater RPN” and “DECT sync source
RPN”
Local Automatic: Repeater controlled by auto detects best base signal and auto assign
RPN.
5.14.1.1 Manually
User controlled by manually assigning “Repeater RPN” and “DECT sync source RPN”. The parameters are selected
from the drop-down menu.
Screenshot
After saving the configurations above, the information and status of the repeater will be visible on the main Repeaters
page (please see the image below).