Users Manual

SME VOIP SYSTEM GUIDE 1.1 104 | P a g e
Proprietary and Confidential
9 Multiline Feature
This section describes how to register the wireless handsets to a system with active multiline feature. One handset will
be able to support up to 4 lines (4 different SIP accounts) ... A handset only supports 2 call appearances.
The limitation of maximum 1000 terminals in the system is maintained, and the maximum number of SIP registrations
that one Base station can handle, is maintained.
With 4 lines pr. extension maximum number of terminals registered in a system is 250.
With 1-line pr. extension maximum number of terminals registered in a system is 1000.
Still the limitation of 30 SIP accounts registered pr. base is maintained.
With 4 lines (SIP accounts) pr. terminal maximum number of terminals registered pr. base is 7.
The 4 SIP accounts pr. terminal follow the location of the terminal similar.
With multiline feature enabled 200 contacts in contact list is possible.
9.1 How to setup Multiline.
STEP 1 Start by registering a handset as described above ( 7 Appendix – Adding extensions).
STEP 2 To add a multiline, select the existing handset that you want to add the multiline to, instead of “New
handset” (in this case Handset Idx 1).
STEP 3 The extension will now show in the extension list with the same Idx and IPEI as the handset selected.
Note: The handset must be rebooted for the changes to take effect.
The handset will now have two numbers 521 and 522.