Users Manual

SME VOIP SYSTEM GUIDE 1.1 103 | P a g e
Proprietary and Confidential
[ FWU Downloading File tftp://10.1.24.103/FwuPath/8663/8663_v0440_b0001.fwu]
[ Base FWU started]
[ Base FWU ended with exit code 2101 (NE_FILE_TRANSFER_EOF): End of file]
This is the path where the Base station expects to find the firmware:
tftp://10.1.24.103/FwuPath/8663/8663_v0440_b0001.fwu
If such lines can be seen on the output, please check if the path or firmware file is in the correct directory.
8.7 Upload startup/background picture to the handsets
As mentioned in the previous chapter 5.7 Firmware Update Definitions, the system allows the user to upload a startup
and background image to the handset. Before the upload has started, please make sure that the handsets are
registered and present to the Base station.
To start the image upload, please go to the Firmware Update settings menu and type in the location of the images in
the “Terminal file path” field. Afterwards, type in the name of the image you would like to be displayed when the
handset is powered on and click Save/Start Update.
The progress of the uploading can be seen on the Extensions menu, under the “FW Progress” column. Just like the
normal firmware upgrade, the startup/background image upload will show progress in %. Afterwards, the handset
should be placed in the charger when “Waiting for charger” message has been displayed. After restarting, the handset
will be ready to use.
Note: If the file is not found, the “FWU Progress” column will display “Error”.
NOTE: If the image is not present after restarting, please reset the settings of the handset. Go to Settings – Reset
settings.