Users Manual

SME VOIP SYSTEM GUIDE 1.1 96 | P a g e
Proprietary and Confidential
NOTE: The Access code (AC) is used to allow the handset to register to the base station. By default the value is 0000,
but the user can change the AC to another numeric value. This can be done by editing the “AC” parameter, marked
with green, on the Base screenshot from above.
STEP 6 Confirm the registration from the unique handset IPEI which is displayed in column “IPEI” when the
handset is successfully registered.
NOTE: The web page must be manually updated by pressing “F5” to see that the handset is registered; otherwise the
handset IPEI (International Portable Equipment Identity) isn’t displayed on the web page.
Screenshot
STEP 7 Confirm the SIP registration by SIP State in right column.
NOTE: The web page must be manually updated by pressing “F5” to see that the handset is SIP registered; otherwise
the handset SIP state isn’t displayed on the web page.
Repeat STEP 2-7 for each handset you want to register.