Users Manual

SME VOIP SYSTEM GUIDE 1.1 92 | P a g e
Proprietary and Confidential
Screenshot
Click the Save button to keep modified changes of multi cell settings into the Base station.
Screenshot
NOTE: After you save, the System information changes status to “Unchained Allowed to Join as Primary”
NOTE: The Multi Cell data synchronization ONLY works when the relevant Time Server is set in the system before
Server/Subscriber profile is added or created. Refer to STEP 5.
IMPORTANT: Base stations must be rebooted after the time server has been set.
IMPORTANT: Only the main Base station should have all data entered such as extensions, servers, time, etc. The
secondary devices that are joining the Multi cell system should be defaulted.
STEP 11 Logon to the Base station that you want to connect to the Multi Cell system.
STEP 12 Navigate to the multi Cell page and “Enable” Multi Cell system. Enter the System Chain ID that you
used on the first Base station.
STEP 13 Press Save and Reboot