Users Manual

SME VOIP SYSTEM GUIDE 1.1 84 | P a g e
Proprietary and Confidential
Logging
The Diagnostics/Logging page allows you to collect system diagnostics information into a zip file.
5.18.3.1 RSX internal tracing
RSX internal tracing can be either Enabled or Disabled. When the feature is enabled, the traced data is used by the RTX
engineers which are the only ones that can debug the traces.
5.18.3.2 PCAP internal tracing
This feature allows the user to choose which trace to investigate by selecting the desired parameter.
PARAMETERS
DESCRIPTION
TRACE PACKETS
TO/FROM THIS BASE
(EXCEPT AUDIO)
If selected, all Ethernet packets sent to/from the Base station’s MAC address will be
traced. Broadcast packets sent from the base are also being traced.
TRACE AUDIO PACKETS
TO/FROM THIS BASE
If selected, RTP streams to/from the BS will be traced. Audio packets are filtered by the
port number used for RTP packets which is set on the web page
TRACE RECEIVED
BROADCAST PACKETS
If selected, all broadcast packets received by the BS will be traced.
TRACE RECEIVED IPV4
MULTICAST PACKETS
If selected, all received IPv4 multicast packets will be traced
TRACE RECEIVED
PACKET WITH
DESTINATION MAC
BETWEEN
If selected, each byte of the received destination MAC is checked if it is in the trace
range
TRACE RECEIVED
ETHERTYPE
If selected, the user can select 3 received Ethertypes to trace
TRACE RECEIVED IPV4
PROTOCOL
If selected, the user can select 3 received IPv4 protocols to trace