Users Manual

SME VOIP SYSTEM GUIDE 1.1 73 | P a g e
Proprietary and Confidential
alarm state, it could potentially be cancelled, and if the Emergency Button alarm was ignored in this case, no alarm
would be sent. This is the reason alarms with no pre-alarm, are given higher priority than alarms in pre-alarm state.
5.16 Statistics
The statistic feature is divided into four administrative web pages, which can be access from any base.
1. System
2. Calls
3. Repeater
4. DECT data
5. Call quality
All five views have an embedded export function, which export all data to comma separated file.
By pressing the clear button all data in the full system is cleared.
System data
Data is organized in a table as shown in the below example.
Screenshot
The table is organized with headline row, data pr. base rows and with last row containing the sum of all base
parameters.
PARAMETERS
DESCRIPTION
BASE STATION
NAME
Base IP address and
Base station
name from management settings
OPERATION/DURATION
D-H:M:S
Operation is operation time for the base since last reboot.
Duration is the operation time for the base since last reset of statistics, or firmware
upgrade.
DECT OPERATION
D
-
H:M:S
Displays information about Days, Hours, Minutes and Seconds that the base station has
been running
BUSY Busy Count is the number of times the base has been busy.
BUSY DURATION
D-H:M:S
Busy duration is the total time a base has been busy for speech (8 or more calls active).
SIP FAILED
Failed SIP registrations count the number of times a SIP registration has failed
HANDSET REMOVED Handset removed count is the number of times a handset has been marked as removed
SEARCHING Base searching is the number of times a base has been searching for its sync source
FREE RUNNING
Base free running is the number of times a base has been free running