Users Manual

SME VOIP SYSTEM GUIDE 1.1 71 | P a g e
Proprietary and Confidential
Local Automatical: Repeater controlled by auto detects best base signal and auto assign
RPN.
Chaining Automatical: Base controlled by auto detects best base or repeater signal and
auto assign RPN. This feature will be supported in a future version
STATE
Present@unit means connected to unit with RPN yy
FW INFO Firmware version
FWU PROGRESS Possible FWU progress states:
Off: Means sw version is specified to 0 = fwu is off
Initializing: Means FWU is starting and progress is 0%.
X% : FWU ongoing
Verifying X%: FWU writing is done and now verifying before swap
”Conn. term. wait” (Repeater): All FWU is complete and is now waiting for connections
to stop before repeater restart.
Complete HS/repeater: FWU complete
Error: Not able to fwu e.g. file not found, file not valid etc.
For detailed description on how to operate repeaters please ask RTX support for the “How to register repeaters”
guide.
5.15 Alarm
In the Alarm Settings menu, it is controlled how an alarm appears on the handset. For example, if the handset detects
“Man Down”, then it is defined in this menu what alarm signal this type of alarm will send out and if a pre-alarm shall
be signaled etc. The Alarm is activated by a long press on the Alarm key ( 3 sec).
Screenshot
All configuration of the handset Alarm Settings is done from the Base station. The concept is that on the “Alarm” page
on the web server, eight different alarm profiles can be configured. Afterwards for each handset, it can be selected
which of the configured alarm profiles, the given handset shall subscribe to. When this is done the selected alarm,
profiles are sent to the handset.
See section 5.3.3 handset.
PARAMETERS DESCRIPTION
IDX Indicates the index number of a specific alarm.
PROFILE ALIAS An alias or user-friendly name to help identify the different profiles when selecting which
profiles to enable for the individual handsets.
ALARM TYPE The type of alarm is dependent of what kind of event that has triggered the alarm on the
handset.
The type of alarms supported is handset related.
RTX8632/RTX8633: