User Manual

Poly Large Room Kit with Poly Studio E70
SETUP SHEET
See the Regulatory Noces for all regulatory and safety guidance prior to conguraon.
Avant de procéder à la conguraon, veuillez consulter les Avis de réglementaon, an de prendre connaissance des recommandaons en maère de sécurité et de réglementaon.
Get Started
Before you begin, make sure that you have the following:
Display HDMI cable(s)
Phillips #1 screwdriver and athead screwdriver
(Oponal) EDID emulator (see step 7)
Unpack the Poly Studio E70, PoE injector, Poly GC8, Conferencing PC, and 10 m USB-A to USB-C cable from their boxes. Note that
the Conferencing PC is shipped separately.
For support, go to Poly Support.
For Warranty informaon, see the Polycom Product Warranty Guide.
www.poly.com/setup/poly-room-kits
3725-87773-001B

Summary of content (3 pages)