User's Guide
Table Of Contents
- Contents
- Before You Begin
- Getting Started
- Logging In to and Locking Your Phone
- Logging In to Your Poly CCX Phone
- Locking Your Phone
- Audio Calls
- Use the Handset, Headset, or Speakerphone
- Placing Audio Calls
- End an Audio Call
- Answering Audio Calls
- Decline an Incoming Call
- Holding and Resuming Calls
- Calling Contacts from Directories
- Placing Intercom Calls
- Managing Multiple Calls
- Transferring Calls
- Mute the Microphones
- Unmute the Microphones
- Call Precedence and Preemption
- Parking and Retrieving Calls on the BroadSoft BroadWorks Server
- Managing Calls Remotely with Broadworks Server
- Ignoring or Rejecting Incoming Calls
- Recording Audio Calls
- Video Calls
- Conference Calls
- Shared Lines
- Call Lists and Directories
- Accessing, Sending, and Broadcasting Messages
- Poly CCX Phone Settings
- Password Required to Access Basic Settings
- Set the System Language
- Disable Call Waiting
- Time and Date Display
- Backlight Intensity and Timeout
- Changing Your Background
- Screen Savers
- Use Your Phone as a Digital Picture Frame
- Power Saving Mode
- Changing Audio Settings
- Updating Your Buddy Status
- Security Classification
- Clear Call Logs and Contacts
- Restrict Call Log and Contact Uploads
- Phone Applications
- Connecting Bluetooth and USB Devices
- Connecting to a Wireless Network
- BroadSoft Features
- BroadSoft Directories
- Managing BroadSoft UC-One Favorites and Contacts
- BroadSoft UC-One Simultaneous Ring
- BroadSoft Executive-Assistant
- Access the Call Actions for BroadWorks Dynamic Busy Lamp Field (BLF)
- Ribbon Communications Features
- Maintaining Your Phone
- Troubleshooting
Use the Privacy Shutter on the Camera to Stop Sending Video
You can use the privacy shutter on your USB camera to stop transmitting video during a call.
Procedure
» On the side of the camera lens, rotate the Privacy Shutter Adjuster from the left to the right.
Camera Status Indicators and Messages
Your camera uses LED indicators as well as messages on the phone’s screen to communicate its status.
Use the following tables to understand the LED indicators and onscreen messages.
Camera LED Indicators
LED State Phone State
No LED One of the following:
• Phone has no power
• Camera shutter is closed
Flashes amber and green Camera firmware is updating
Green V
ideo call is connected
Amber The camera is on and the shutter is open, but no video
is being sent.
Camera Messages
Message Action
Camera attached. Firmware sync in progress, do not
remove camera.
(CCX 600 only)
Your camera is upgrading. Don’t remove your camera
during this process. The upgrade is complete when you
receive a message stating that either “firmware sync
complete” or “upgrade failed”.
Camera firmware sync complete. Camera ready. Indicates that your camera is ready to use.
Camera firmware sync complete. Contact administrator
to enable video.
Indicates that your camera is ready to use. However,
your phone is not enabled to send and receive video.
Contact your system administrator to enable video
calls.
Camera firmware sync complete. Camera rebooting. Indicates that the camera firmware sync is finished and
your camera is in the process of rebooting.
Camera firmware sync complete. Video available when
next idle.
Indicates that your camera is ready to use for your next
video call.
Camera attached, camera ready.
(CCX 600 only)
Indicates that your camera is ready to use.
Video Calls
60