User Manual

2 Connection is successful when you hear "PC connected" and the USB adapter turns solid.
NOTE Adapter design may vary.
Pair USB adapter again
Your USB adapter is pre-paired to your speakerphone. In the event that your adapter is
disconnected or if bought separately, manually pair the adapter to your speakerphone.
1 Insert the Bluetooth USB adapter into your laptop or computer and wait for your computer to
recognize it.
2 Put your speakerphone in pair mode by pressing the Bluetooth button for 2 seconds. You hear
"pairing" and the LED bar flashes a blue crossing pattern.
3 Put your adapter into pair mode by pressing and holding the recessed pair button with a pen or
paperclip until the adapter flashes red and blue.
NOTE Adapter design may vary
Pairing is successful when you hear "pairing successful; PC connected" and the adapter LED turns
solid.
Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music,
you will need to configure your Bluetooth USB adapter.
Windows
1
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound
> Playback tab. Select Plantronics BT600, set it as the Default Device and click OK.
2
To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >
Communications tab and select the desired parameter.
Configure USB adapter
6