User Manual

Important: Your speakerphone is shipped from the factory in a Deepsleep mode to conserve
battery. Activate your speakerphone by connecting the USB cable to a power source before first
use.
1 Connect speakerphone USB cable to a wall charger or computer.
When your speakerphone is activated, the LED bar lights up.
2 Connect or pair your speakerphone to take calls or stream media.
1
With your speakerphone powered on, press the Bluetooth
button for 2 seconds. You hear
"pairing" and the LED flashes a crossing blue pattern.
Headphones
Headset
Blutooth
Device Controls
2 Activate Bluetooth on your mobile device and set it to search new devices. Select “Poly Sync 20.”
3 Pairing is successful when you hear "pairing successful" and the LED flashes blue.
Connect the USB cable from the speakerphone to the USB port on your computer.
Your Bluetooth USB adapter comes pre-paired to your speakerphone.
1 Power on your speakerphone and insert the Bluetooth USB adapter into your computer.
Setup
First-time setup
Mobile setup
Corded setup
USB adapter setup
(BT600 models only)
5