PLANTRONICS + POLYCOM.
Contents Controls and status lights 3 LEDs 4 USB Bluetooth adapter (adapter model only) Setup 5 First-time setup 5 Mobile setup 5 Corded setup 5 USB adapter setup (BT600 models only) Configure USB adapter 6 Charge 8 Charge 8 Charge your mobile phone Load software 4 5 8 9 Daily Use 10 Power 10 Answer or end a call 10 Microsoft Teams button (Teams model only) Mute/Unmute 10 Volume 10 Voice assistant (smartphone feature) 10 Customize your speakerphone 10 10 More Features 11 Attach lanyard 11 Update fir
Controls and status lights A portable speakerphone with mobile and corded connectivity.
LEDs LED bar What lights mean Crossing blue pattern Pairing Solid blue Pairing successful (connected) Flashing green Incoming call Solid green In a call Solid red Mute active NOTE LEDs do not illuminate in standby mode.
Setup First-time setup Mobile setup Important: Your speakerphone is shipped from the factory in a Deepsleep mode to conserve battery. Activate your speakerphone by connecting the USB cable to a power source before first use. 1 Connect speakerphone USB cable to a wall charger or computer. When your speakerphone is activated, the LED bar lights up. 2 Connect or pair your speakerphone to take calls or stream media. 1 With your speakerphone powered on, press the Bluetooth button for 2 seconds.
2 Connection is successful when you hear "PC connected" and the USB adapter turns solid. NOTE Adapter design may vary. Pair USB adapter again Your USB adapter is pre-paired to your speakerphone. In the event that your adapter is disconnected or if bought separately, manually pair the adapter to your speakerphone. 1 Insert the Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.
Mac 1 To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On both the Input and Output tabs, select Plantronics BT600.
Charge Charge Charge the speakerphone via USB using your computer or a USB AC adapter (not provided). Allow 4 hours for a full charge. Charge your mobile phone With the speakerphone powered on, charge your phone by connecting your phone's charge cable to the speakerphone USB-A port (cable not provided). Mobile Computer Blutooth NOTE Speakerphone battery level must be medium or higher. NOTE Connection provides power only.
Load software Plantronics Hub is an invaluable tool. NOTE Some softphones require Plantronics Hub for Windows/Mac to enable device call control (answer/end and mute) functionality. • Download Plantronics Hub for Windows/Mac by visiting poly.com/software. • Download Plantronics Hub for iOS/Android by visiting poly.com/software, the App Store or Google Play.
Daily Use Power Answer or end a call Microsoft Teams button (Teams model only) Press the Power powered on. Press the Call button for 2 seconds to power on or off. The LED bar illuminates when button to answer or end a call. Press the Teams button to interact with Microsoft Teams when not on a call. NOTE Not supported for mobile use. NOTE The Microsoft Teams application must be installed.
More Features Attach lanyard Use the lanyard to carry speakerphone on your wrist. The lanyard slot is located on the side of the speakerphone. NOTE Lanyard is included in box. 1 Insert the loop through one side of the slot and push through to the other side. 2 Thread the lanyard through the loop and pull to secure.
Update firmware Keep your firmware up-to-date to improve performance and add new features to your Poly device. Update your firmware using your computer or mobile device with Plantronics Hub. Download at poly.com/software. While updating firmware: • Do not use your Poly device until the update is complete. • Disconnect your Poly device from paired devices such as phones, tablets and computers. • Do not start a second update from a second device. • Do not stream media on your smartphone.
Support NEED MORE HELP? poly.com/support Plantronics, Inc. Plantronics B.V. 345 Encinal Street Scorpius 171 Santa Cruz, CA 95060 2132 LR Hoofddorp United States Netherlands © 2020 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.
