Quick Start Guide
BT600 
ADAPTER 
QUICK START GUIDE
Designed in Santa Cruz, California
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
Plantronics BV
South Point Building C
Scorpius 140
2132  LR  Hoofddorp 
Netherlands
© 2015 Plantronics, Inc. Plantronics is a trademark of Plantronics, 
Inc. registered in the US and other countries, and BT600 is a 
trademark of Plantronics, Inc. Bluetooth is owned by Bluetooth SIG 
Inc., any use by Plantronics, Inc. is under license. Mac is a trademark 
of Apple Inc. All other trademarks are the property of their respective 
owners.
203936-01 08.15
plantronics.com/support
plantronics.com/documentation
CONFIGURE
Windows
Your USB adapter comes ready to 
take calls. If you want to listen to 
music, you need to configure your 
USB adapter.
1  To configure your USB adapter to play 
music, go to Start menu > Control 
Panel > Sound > Playback tab. Select   
Plantronics BT600, set it as the 
Default Device and click OK. 
2  To pause music when you place 
or receive calls, go to Start 
menu > Control Panel > Sound > 
Communications tab and select the 
desired parameter.
Mac
To configure the USB adapter, go to 
Apple menu > System Preferences > 
Sound. On both the Input and Output 
tabs, select Plantronics BT600. 
PAIR
To pair your high-fidelity Bluetooth® 
USB adapter to your headset, do the 
following:
1  Insert the USB adapter into your 
laptop or computer and wait for your 
computer to recognize it. 
2  Put your headset in pair mode (refer to 
your headset’s user guide).
3  Put your USB adapter into pair mode 
by pressing and holding the recessed 
Pair button until the USB adapter 
flashes red and blue.
Pairing is successful when you hear 
“pairing successful” and the USB 
adapter LED is solid blue.


