MD3000 mulch & rock display ASSEMBLY INSTRUCTIONS IMPORTANT Please read these instructions carefully before starting to assemble this display. Save these instructions for future reference.
PARTS IDENTIFICATION MULTIPLE BIN COMPARTMENT OPTIONS MD1002 BACK SUPPORT MD1001 FOUR COMPARTMENT BIN NB1824 14" x 1 1/2" CARRIAGE BOLT NB1860 1/4" LOCK WASHER MD1004 THREE COMPARTMENT BIN NB1902 1/4" WING NUT MD1000 END STAND MD1005 TWO COMPARTMENT BIN MD1003 SIGN HOLDER (24") 2
ASSEMBLY INSTRUCTIONS ATTACH THE BACK SUPPORT TO THE END STANDS USING (4) 1/4" x 1 1/2" CARRIAGE BOLTS, LOCK WASHERS AND WING NUTS AS SHOWN.
ASSEMBLY INSTRUCTIONS FASTEN THE SIGN HOLDER TO THE DISPLAY USING (2) 1/4" x 1 1/2" CARRIAGE BOLTS, LOCK WASHERS, AND WING NUTS AS SHOWN.
ASSEMBLY INSTRUCTIONS SELECT BIN STYLE & QUANTITY TO BE INSTALLED (UP TO 5). PLACE EACH END OF A BIN OVER A PAIR OF SCREW HEADS ON THE END STAND. INSERT THE SCREW HEADS THRU THE KEY HOLES AS SHOWN IN DETAIL A. THEN SLIDE THE BIN DOWN TO LOCK IT SECURELY AS SHOWN IN DETAIL B. THREE COMPARTMENT BIN TWO COMPARTMENT BIN REPEAT FOR THE OTHER END OF THE BIN. FOLLOW THIS PROCEDURE UNTIL ALL BINS ARE SECURED IN PLACE.
SAFETY GUIDELINES Do not climb, sit on, or use this product as a ladder. Injuries may occur. Do not place or install electrical items on this product. Wet conditions are typical and electrical shock may occur. Do not place this product on a slope that exceeds 3 degrees. Do not move this display after product is in place. Damage to display and injuries may occur. CARE & MAINTENANCE To remove loose soil and debris, simply spray the soiled areas with water from a garden hose.