FTT300 folding table display ASSEMBLY INSTRUCTIONS IMPORTANT Please read these instructions carefully before you start to assemble this display. Save these instructions for future reference. FTT300 v1.0.
TABLE TOP (FTT100) qty (1) TABLE LEG (FTT111) qty (2) LOCKING BRACE (FTT112) qty (2) PURLIN SUPPORT (FTT103) qty (2) BASKET PURLIN (FTT104) qty (1) SIGN HOLDER (FTT105) qty (1)
1 UNFOLD LEGS. 2 SLIDE LOCKING BRACE RING OVER BRACE ARMS AS SHOWN. 3 INSERT PURLIN SUPPORTS INTO THE SQUARE TUBES ON THE BACK OF THE TABLE TOP. 4 4 INSERT BASKET PURLIN INTO THE PURLIN SUPPORTS. 4 5 (OPTIONAL) 3 3 2 OPTIONAL: 5 FASTEN SIGN HOLDER TO PURLIN SUPPORTS USING CARRIAGE BOLT, LOCK WASHER & WING NUT.
Do not climb, sit on, or use this product as a ladder due to possible injuries. Do not place or install electrical items on this product. Wet conditions are typical and electrical shock is possible. Do not place this product on a slope that exceeds 10 degrees. Do not move this display after product is in place. Damage to display and injuries may occur. To remove loose soil and debris, simply spray the soiled areas with a garden hose.
