CH8000/CH8001/CH8100 ASSEMBLY INSTRUCTIONS IMPORTANT Please read these instructions carefully before beginning to assemble this display. Save instructions for future reference. P.O. Box 458 27725 Danville Avenue Castle Rock, MN 55010 www.poly-tex.com REV: AB-120329 U.S.
PARTS IDENTIFICATION CH8003 TABLE TOP 24" x 72" (2) CH8002 TABLE LEG 34" CH8004 TABLE TOP 24" x 36" (2) NB1970 5/16-18 x 3/4" BUTTON HEAD CAP SCREW NB1974 3/16" WRENCH HEX (1) NB1862 5/16" LOCK WASHER NB1872 5/16" HEX NUT NB1886 5/16" FLAT WASHER TOOLS & EQUIPMENT REQUIRED 2 A 3/16" hex wrench (provided) and a 1/2" open end (or adjustable) wrench are required for assembly.
ASSEMBLY INSTRUCTIONS CH8000 CH8002 - 4 NB1970 - 16 NB1886 - 16 NB1862 - 16 NB1872 - 16 TYPICAL LEG TO TABLE TOP CONNECTION LOWER SHELF MOUNTS INSIDE LEGS LEGS MOUNT INSIDE UPPER TABLE TOP 3
ASSEMBLY INSTRUCTIONS CH8001 CH8002 - 4 NB1970 - 16 NB1886 - 16 NB1862 - 16 NB1872 - 16 TYPICAL LEG TO TABLE TOP CONNECTION LOWER SHELF MOUNTS INSIDE LEGS LEGS MOUNT INSIDE UPPER TABLE TOP 4
ASSEMBLY INSTRUCTIONS CH8100 CH8002 - 8 NB1970 - 28 NB1886 - 28 NB1862 - 28 NB1872 - 28 PLACE LEGS INSIDE UPPER TABLE TOPS TYPICAL LEG TO TABLE TOP CONNECTION CH8003 24" x 72" TABLE TOP (2) CH8004 24" x 36" TABLE TOP(2) CH8002 34" TABLE LEG (8) LOWER SHELVES MOUNT INSIDE LEGS LEGS MOUNT INSIDE UPPER TABLE TOPS 5
DRAWER ASSEMBLY FOR 72" TABLE - OPTIONAL NB1750 - HEX BOLT 1/4" x 3/4" (4) NB1860 - LOCK WASHER 1/4" (4) NB1870 - LOCK WASHER 1/4" (4) CH8020 RIGHT DRAWER GUIDE (24") CH8007 TABLE TOP 24" x 72" (W/HOLES) VERTICAL EDGE HERE CH8022 CASHIERS TABLE DRAWER (24") TOOLS & EQUIPMENT REQUIRED 6 Two 7/16" open end wrenches CH8021 LEFT DRAWER GUIDE (24")
DRAWER ASSEMBLY FOR 36" TABLE - OPTIONAL NB1750 - HEX BOLT 1/4" x 3/4" (4) NB1860 - LOCK WASHER 1/4" (4) NB1870 - LOCK WASHER 1/4" (4) CH8020 RIGHT DRAWER GUIDE (24") CH8021 LEFT DRAWER GUIDE (24") CH8005 TABLE TOP 24" x 36" (W/HOLES) VERTICAL EDGE HERE CH8022 CASHIERS TABLE DRAWER (24") TOOLS REQUIRED Two 7/16" open end wrenches 7
SAFETY GUIDELINES Do not climb, sit on, or use this product as a ladder. Injuries may occur. Do not place or install electrical items on this product. Wet conditions are typical and electrical shock may occur. Do not place this product on a slope that exceeds 3 degrees. Do not move this display after product is in place. Damage to display and injuries may occur. CARE & MAINTENANCE To remove loose soil and debris, simply spray the soiled areas with water from a garden hose.
