CD3000 3-level circle display ASSEMBLY INSTRUCTIONS IMPORTANT Please read these instructions carefully before beginning to assemble this display. Save instructions for future reference. P.O. Box 458 27725 Danville Avenue Castle Rock, MN 55010 www.poly-tex.com REV: AB-120329 U.S.
PARTS IDENTIFICATION CD4005 20" SHELF CD4001 BASE CD4003 28" SHELF NB1848 5/16" x 2" HEX BOLT (2) NB1979 5/32" HEX WRENCH CD4002 POST NB1978 5/16" SET SCREW (4) NB1903 5/16" WING NUT (2) OPTIONAL COMPONENTS CD4006 SIGN POST 22 1/2" CD4007 SIGN HOLDER, 3 SIDE TOOLS & EQUIPMENT REQUIRED No additional tools are required.
ASSEMBLY INSTRUCTIONS 20" TOP SHELF INSERT CASTER INTO STUB OF BASE 28" MIDDLE SHELF POST 5/16" WING NUT (3) TWIST CASTER UNTIL TIGHT 5/16" x 2" HEX BOLT (3) BASE 1. INSERT END OF POST INTO THE BASE. SLIDE SHELVES ONTO POST AND FASTEN WITH A 5/16" X 2" BOLT & WING NUT.
ASSEMBLY INSTRUCTIONS 2. USE 5 SET SCREWS TO HOLD POST AND SHELVES FIRMLY IN PLACE.
OPTIONAL SIGN HOLDER ASSEMBLY 1. SLIDE RECESSED END OF SIGN POST INTO TOP OF POST. SLIDE SIGN HOLDER ONTO TOP OF SIGN POST. CASTER USE INSTRUCTIONS ONCE THE DISPLAY IS IN PLACE, ALL CASTERS MUST BE LOCKED INTO PLACE USING THE CASTER BRAKES TO PREVENT DISPLAY MOVEMENT. THE BRAKE IS ACTIVATED BY ROTATING THE LEVER FROM THE "OFF" POSITION TO THE "ON" POSITION AS SHOWN.
SAFETY GUIDELINES Do not climb, sit on, or use this product as a ladder. Injuries may occur. Do not place or install electrical items on this product. Wet conditions are typical and electrical shock may occur. Do not place this product on a slope that exceeds 3 degrees. Do not move this display after product is in place. Damage to display and injuries may occur. Lock casters (when provided) once display is in place to prevent movement. Remove all debris or obstacles from caster's path before moving.
