BH3000 basket hanger ASSEMBLY INSTRUCTIONS IMPORTANT Please read these instructions carefully before beginning to assemble this display. Save instructions for future reference. P.O. Box 458 27725 Danville Avenue Castle Rock, MN 55010 www.poly-tex.com REV: AA-120314 U.S.
PARTS IDENTIFICATION GM4000 6'-1 1/2" BASKET PURLIN (2) BH1000 BASKET HANGER STABILIZER (2) BH1010 BASKET HANGER LEG (4) BH1005 BASKET HANGER PEAK (2) NB1901 3/8" WING NUT (8) BH1015 40 1/2" SPREADER (2) NB1923 NYLON WASHER (8) OPTIONAL PARTS GM2970 HOOP PAD (4) BH1011 BASKET HANGER LEG W/CASTER (4) TOOLS & EQUIPMENT REQUIRED No tools are required for the assembly of this product.
ASSEMBLY INSTRUCTIONS PINCH HAZARD 2 USE CAUTION DURING ASSEMBLY 1 1 2 PINCH HAZARD USE CAUTION DURING ASSEMBLY 3 3 4 4 1 INSERT STABILIZERS INTO PEAKS, MAKING SURE THE SNAP BUTTONS ARE SECURE. 2 ATTACH SPREADERS AND BASKET PURLIN USING WINGNUTS AND NYLON WASHERS AS SHOWN. 3 INSERT LEGS INTO STABILIZERS MAKING SURE SNAP BUTTON PROTRUDES THROUGH THE HOLES. 4 INSERT HOOP PADS INTO LEGS.
WREATH HANGER OPTION BH3005 STANDARD WREATH HANGER KIT 4
WREATH HANGER OPTION ENSURE THAT BOTH "J" FITTINGS REST ON THE BASKET PURLIN 5
SAFETY GUIDELINES Do not climb, sit on, or use this product as a ladder. Injuries may occur. Do not place or install electrical items on this product. Wet conditions are typical and electrical shock may occur. Do not place this product on a slope that exceeds 3 degrees. Do not move this display after product is in place. Damage to display and injuries may occur. Lock casters (when provided) once display is in place to prevent movement. Remove all debris or obstacles from caster's path before moving.
