BD3000 circular display 32-54 ASSEMBLY INSTRUCTIONS IMPORTANT Please read these instructions carefully before beginning to assemble this display. Save instructions for future reference. P.O. Box 458 27725 Danville Avenue Castle Rock, MN 55010 www.poly-tex.com REV: AB-120329 U.S.
PARTS IDENTIFICATION BD1000 BASE (32") BD1001 SHELF (32") NB1972 1/4" x 1 1/2" HEX BOLT NB1840 1/4" x 3/4" HEX BOLT BD1002 SHELF (16") NB1860 1/4" LOCK WASHER BD1003 SUPPORT (50") TOOLS & EQUIPMENT REQUIRED (2) 7/16" WRENCHES 2 NB1870 1/4" HEX NUT
ASSEMBLY INSTRUCTIONS ATTACH SUPPORT TO BASE USING 1/4" x 3/4" HEX BOLTS, LOCK WASHERS, AND HEX NUTS AS SHOWN. FINGER TIGHTEN ONLY AT THIS TIME.
ASSEMBLY INSTRUCTIONS DETERMINE THE REQUIRED HEIGHT OF THE SHELF. ALIGN THE SHELF (32") WITH THE HOLES IN SUPPORT AND ATTACH USING 1/4" x 1 1/2" HEX BOLTS, LOCK WASHERS, AND HEX NUTS AS SHOWN. FINGER TIGHTEN ONLY AT THIS TIME. SHELF (32") 1/4" x 1 1/2" HEX BOLT, LOCK WASHER, & HEX NUT.
ASSEMBLY INSTRUCTIONS POSITION SHELF (16") BETWEEN TOP OF SUPPORTS AND ATTACH USING 1/4" x 3/4" HEX BOLTS, LOCK WASHERS, AND HEX NUTS AS SHOWN. STRAIGHTEN DISPLAY AND TIGHTEN BOLTS SECURELY.
SAFETY GUIDELINES Do not climb, sit on, or use this product as a ladder. Injuries may occur. Do not place or install electrical items on this product. Wet conditions are typical and electrical shock may occur. Do not place this product on a slope that exceeds 3 degrees. Do not move this display after product is in place. Damage to display and injuries may occur. Lock casters (when provided) once display is in place to prevent movement. Remove all debris or obstacles from caster's path before moving.
