User guide - Poly Sync 40 +

Connect the USB cable from the speakerphone to the USB port on your computer.
USB-A / USB-C
NOTE In corded mode, the speakerphone powers on without using the Power button.
1 With your speakerphone powered on, press the Bluetooth button for 2 seconds. You hear
"pairing" and the LED flashes a crossing blue pattern.
Poly Sync 40
“Pairing”
Headphones
Computer
Camera
Blutooth
Blutooth
“Phone connected”
:02
Headphones
Camera
Headset
Blutooth
2 Activate Bluetooth on your mobile device and set it to search new devices. Select “Poly Sync 40.”
3 Pairing is successful when you hear "pairing successful" and the LED flashes blue.
Secure Connection (mobile)
The Secure Connection feature provides extra security for Bluetooth calls in a conference room.
When enabled, your paired device disconnects after each mobile call, ensuring that device audio
does not play through the speakerphone when not intended. Manage in Poly Lens.
NOTE Enabling Secure Connection disconnects previously paired devices.
1 With your speakerphone powered on and Secure Connection enabled in Poly Lens, press the
Bluetooth
button for 2 seconds. You hear "pairing" and the LED flashes a crossing blue pattern.
2 Activate Bluetooth on your device and set it to search new devices. Select “Poly Sync 40.”
Poly Sync 40
“Pairing”
Headphones
Computer
Camera
Blutooth
Blutooth
“Phone connected”
:02
Headphones
Camera
Headset
Blutooth
3
Pairing is successful when you hear "pairing successful" and the LED flashes blue.
“Pairing
successful”
4
Make or take a mobile call or play music via Bluetooth.
5
After the end of a call, continue the mobile connection by pressing any button within 30 seconds.
When no action is taken, the mobile connection ends and the Bluetooth button is no longer
illuminated.
Setup
Corded setup
Mobile setup
6