User Manual

STEP 2

The Headset included with the S10 Telephone Headset can be

used with the Adjustable Headband or with one of the

Ear Hooks .

HEADBAND USE

Snap the Headband into the back of the Headset Assembly.

Press the Ear Cushion Assembly onto the Headset Assembly ,

aligning the notch in the ring with the Voice Boom .

Place the Headset on either ear and adjust the Headset to a

comfortable position by moving the Adjustable Headband .

Position the Voice Boom near the corner of your mouth.

EAR HOOK USE

Press the Pivot Ball Ring onto the Headset Assembly .

Insert one of the Ear Hooks into the Pivot Ball. You may need

to try each size to find the most comfortable fit. Slip the hook

over your ear and position the Voice Boom near the corner

of your mouth.

CLOTHING CLIP

The Clothing Clip keeps the Headset free from the weight of the

cord. Attach the clip to your clothing at about chest level. Allow

enough slack in the cord (approximately 6 inches) to permit your

head to move without pulling on the Headset or the Clothing Clip.

You are now ready to make or receive calls.

USING THE HEADSET

S10 6/6/01 4:44 PM Page 17