BackBeat PRO 5100 True Wireless Earbuds User Guide
Contents Controls overview 3 Power and pair 4 Power on the case Pair first time 4 Pair mode 4 4 Charge 5 Quick charge 5 Check battery level Fit 7 Replace eartips Install the app 5 7 8 The Basics 9 Power on/off your earbuds Adjust the volume 9 Play or pause audio 9 Track selection 9 Make/Take/End Calls 10 Use Siri, Google Now 10 Use sensors 10 Mono mode 10 Reconnect 10 9 More Features 11 DeepSleep mode 11 Connect new earbud 11 Switch controls 11 Troubleshoot Support 13 14 2
Controls overview L R x1 x2 :02 x1 Siri, Google Now x3 :04 Left :02 :02 :04 Secondary earbud Volume up Tap to increase levels (touch sensor) Volume down Tap and hold to decrease levels (touch sensor) Power on Click and hold 2 seconds Power off Click and hold 4 seconds Right Primary earbud Play/pause * Click 1 time Next track * Click 2 times Previous track * Click 3 times Call answer/end Click 1 time Siri/ Google Now Click and hold 2 seconds Power on Click and hold 2 seconds Power off Clic
Power and pair Power on the case Your charge case is shipped from the factory in a Deepsleep mode to conserve battery. Power on your charge case to power your earbuds for first use. Click and hold the charge case button for two seconds to power it on. The charge case LEDs light up. case :02 Pair first time The first time you take your earbuds out of the charge case, the pairing process begins. 1 Take the earbuds out of the case.
Charge Your earbuds have up to 6.5 hours of listening time. The charge case holds up to 13 hours of additional listening time. To charge your earbuds, place them in the charge case. Charge the case by plugging it into a computer or USB charging device. For fastest charging, plug them into a wall charger. = = NOTE If the charge case has no charge, first charge the case separately, then charge the earbuds.
Charge case LED Battery level Battery high Battery medium Battery low Battery critical 6
Fit Place earbud in your ear. Rotate down and forward for an optimal fit and sound experience. L 1 R Try the 3 eartips to find which size fits you comfortably while blocking external noise. 2 Listen to music and select the eartip that gives you the most bass response. 3 You may prefer a different size eartip in each ear. Replace eartips Changing the eartips and locking them in place is easy. Left and right are indicated on the earbud and on the eartip.
Install the app Get the most from your earbuds by downloading our free app, BackBeat for iOS/Android.
The Basics L R x1 x2 :02 x1 Siri, Google Now x3 :04 Power on/off your earbuds :02 :02 :04 You can automatically or manually power on/off the earbuds. • Automatic Taking the earbuds out of the case automatically powers your earbuds on. Conversely, putting them back in the case automatically powers them off and starts charging them. • Manual Click and hold the earbud button for 2 seconds to manually power it on. To manually power them off, click and hold for four seconds.
Make/Take/End Calls Answer or end a call Click the right earbud. Answer a second call First, click the right earbud to end current call, then click the right earbud again to answer new call. Mute On a call, remove both earbuds to mute. Put on one or both earbuds to unmute. NOTE Requires active sensors. Use Siri, Google Now Your earbuds support Virtual Personal Assistants (VPA) such as Siri and Google Now. Click and hold the right earbud for two seconds to use your device's VPA.
More Features DeepSleep mode If you leave your earbuds powered on but out of range of your paired device, they conserve power by entering DeepSleep mode after 90 minutes. To exit DeepSleep mode, power on each earbud. Connect new earbud If you lose one of your earbuds and order a replacement, connecting your new earbud to your existing earbud takes a few easy steps. 1 Delete "PLT BBPRO5100" and "PLT BBPRO5100_L" from your phone’s Bluetooth device list.
Bluetooth connection as well as primary controls to the left earbud and moves the volume and My Tap controls to the right earbud.
Troubleshoot I can't pair my new earbuds to my phone. • Ensure that you power on the charge case before first use. See Power on the case. • The first time you take your earbuds out of the charge case, the pairing process begins automatically. See Pair first time. • If your earbuds do not automatically pair to your device, then pair manually. See Pair mode. I want to pair to another phone or pair again to the same phone. See Pair mode. IMPORTANT You can connect your earbuds to one device at a time.
Support NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics B.V. 345 Encinal Street Scorpius 171 Santa Cruz, CA 95060 2132 LR Hoofddorp United States Netherlands © 2019 Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. 215632-06 (08.
