Specifications

PO Box 409 • Hanover, MD 21076 • Tel [phone] • www.polyplanar.com
- 10 -
Specifications:
Speaker Impedance ………………………… 2 – 8 ohm
Output Power (2 ohm load) ………………… 25 W RMS per channel
(4 ohm load) ………………… 15 W RMS per channel
Frequency Response ………………………. 20 Hz – 20 kHz
Operating Voltage ………………….. ……… 13.8V (10V – 16V) DC
Idle Current (no signal) ……………………… 10 mA
Maximum current draw (full power) ……….. 7 A
Remote wire current ………………………… 4 mA
Dimensions (approx. w/h/d) ……………….. 105mm X 40mm X 180mm
4.15 X 1.5 X 4.75 inches
Weight ……………………………………….. 15 oz (.425 Kg)
Volume Control mounting template Note: Horizontal center of part is 5/16 inch
(8mm) to the left of the mounting hole center.
2-1/16 in (52mm)
1-7/16 in (36mm)
Drill = 7/8 in
(22mm)
2-1/16 in (52mm)
5/16 in
(8 mm)
Center line of part