Assembly instructions Patton Dining Chair ASSEMBLY REQUIREMENT 1 PERSON ASSEMBLY | 10 MINUTES ASSEMBLY TIME (APPROXIMATE) TOOLS REQUIRED: ALLEN WRENCH (PROVIDED) ASSEMBLY PREPARATION 1. Remove all packaging materials, staples and packing straps from the carton. 2. Refer to Parts Checklist and ensure they aré complete before you start assembling. 3. Page all components on a clean, flat and soft surface (e.g, carpet of rug) to prevent parts from getting scratched. TIPS FOR ASSEMBLY 1.
PARTS CHECKLIST Allen Wrench X4 Screws X4 Crush Washers x4 Washers fa po a, STEP. Tr While sitting, place chair seat upside down in your lap with backrest hanging over knees. Align chair Bose with holes and secure the legs to the sent using washers C.D and screws B as shown, NOTE: First hand tighten ofl 4 screws and then photofinishing an Allen wrench A, NOTE The chair leg may need to be adjusted to align properly for installation.
Missing something? We work very hard to ship a perfect product; but sometimes furniture or hardware go missing of get damaged in transit, Please contact us ond we'll quickly mike fright. [DO O Need some help? Our support team is here for you. £2 help@polyandoarkcom %. 1(855) 310-1450 (Dpolyandbark.
