Operation Manual

LECOASPIRA PROGRAM

ENGLISH

- Use of the appliance in places where there is a danger of explosions is prohibi-

ted.

- Do not use the product with toxic substances.

- In case of breakdown or malfunction switch off the appliance and never attempt

to disassemble it, but refer to an authorized Polti Service Centre.

- This appliance is equipped with safety devices which are to be replaced only by

a suitably qualified technician.

Before cleaning or storing the appliance, always first ensure that the appliance has

cooled down completely.

- Do not direct the steam jet at people, animals or debris.

- Never place your hands inside the jet of steam.

- Do not use if the appliance has been dropped, has visible signs of damage or

leaks.

- Do not use the appliance to suck up acids or solvents, as these might cause se-

rious damage to the appliance and above all do not suck up explosive dust or li-

quids, as these could cause explosions on coming into contact with the inside com-

ponents of the appliance.

- Do not suck up toxic substances.

- Do not suck up burning or incandescent objects such as embers, ash or other mate-

rial in which combustion is taking place.

- Never direct the suction towards persons or animals.

- If ironing whilst sitting down, take care to ensure that the jet of steam is not angled

towards your legs. Steam can scald.

- Before connecting the appliance to the current, ensure that the continuous steam jet

button is not pressed.

- Never leave the iron unattended when it is plugged in.

- Never leave the appliance unattended during use and when it is connected to

the mains.

- Before refilling the appliance when it is hot, allow it to cool for a few minutes.

- Keep your face away if you fill the boiler when it is still hot, the water can evapo-

rate on contact with the hot boiler, causing a jet of steam.

When filling a hot boiler, we recommend adding small amounts of water to avoid

SAFETY WARNINGS

Risk of injuries and/or burns when using the appliance

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 36