Operation Manual

LECOASPIRA PROGRAM
60
ENGLISH
(steam quantity 0 or 1) and then moving on to fabrics that require greater steam pressure.
Otherwise, although the supply of steam is not prevented, it will be necessary to wait for the boiler
to cool down to allow the appliance to reach the steam pressure selected.
♦ Adjust the temperature of the iron by positioning the temperature adjustment knob (S4) to COT-
TON-LINEN.
♦ Wait a few minutes for the iron heating indicator light (S3) to go off, indicating that the iron has
reached the established temperature.
♦ Press the steam request button (S2) to allow steam to escape.
Releasing the button, the flow of steam stops. When first operating the iron, some drops of water
may leak from the plate mixed with the steam due to imperfect thermal stabilization. We there-
fore recommend that the first jet of steam be directed onto a rag.
♦ To have a continuous jet of steam move the button forward (S1). The steam will continue to
come out even when the button is released (S2). To stop the steam, move the continuous jet in-
sert button backward (S1).
DRY IRONING
When ironing dry, no indicator (8B) should be lit.
Applied to the 120° accessory (E), they combine an abrasive energetic action with the concentra-
ted steam on resistant surfaces.
To clean carpets, use the turbo-brush (M): a turbine system increases effectiveness and efficiency
when vacuuming fabric surfaces.
The use of the turbo-brush on carpets revives the fibres thanks to the brushing action of the roller,
which opens the fibres, allowing for deep cleansing.
The mechanical rotary action of the turbo brush is ideal for removing animal hair from hard
surfaces, rugs and carpets, even shag carpets.
The turbo brush can be used as a traditional brush on hard surfaces since it has a by-pass system
which diverts the air flow directly to the suction pipe.
TURBO-BRUSH (M)
BRASS BRUSHES (E4)
ATTENTION
For dry ironing, before switching on the boiler, adjust the temperature of the iron
by turning the knob (S4) to the temperature required according to the fabric, indi-
cated on the knob itself.
LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 60