Operation Manual

LECOASPIRA PROGRAM

ENGLISH

Vaporetto Lecoaspira Program can quickly become an extremely efficient ironing system,

allowing you to iron more quickly and with less effort. Simply connect the iron accessory to

the product for Vaporetto Lecoaspira (Mod. PFEU0021). The iron can be purchased from

Polti service centres and the best electrical appliance stores.

♦ Connect to the built-in socket (10) the built-in plug (A6) of the iron (S).

♦ Set the MA programme described in the paragraph “Pre-set programmes”.

Before ironing an item of clothing, always check the symbols on its label, for the instructions provi-

ded by the manufacturer.

Check, based on the following table, the most appropriate type of ironing:

STEAM IRONING

♦ Manually adjust the quantity of steam dispensed, depending on your needs, using the UP (4) and

DOWN (5) keys and the lighting up of the indicators (8B).

♦ Follow the instructions listed below to adjust the amount of steam in relation to the fabric being

ironed:

Because of the high pressure at which the product supplies steam, the maximum level of

steam which can be selected for the ironing programme is 3 notches. This value is however suffi-

cient to obtain the best results also on heavier fabrics.

In order to optimise ironing times, we recommend starting to iron the more delicate fabrics first

NOTE

1 level on = WOOL

2 levels on = COTTON

3 levels on = LINEN

all levels off =

SYNTHETICS and SILK

Steam ironing allowed

For dry ironing, set temperature adju-

stment knob (S4) on •••

Steam ironing allowed

For dry ironing, set temperature adju-

stment knob (S4) on ••

Check the fabric's resistance to steam iro-

ning or dry iron with temperature adju-

stment knob (S4) set on •

- do not iron

- steam ironing or treatment not allowed

PROFESSIONAL IRON (S)

OPTIONAL ACCESSORIES

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 59