Operation Manual

LECOASPIRA PROGRAM

ENGLISH

Before treating the surface, always do a test on a hidden part and see how it reacts to the

steam treatment.

To correctly use the steam-suction window cleaner, proceed as follows

♦ uniformly deliver steam on the surface to be cleaned to dissolve the dirt.

♦ Press the window cleaner insert against the surface to be cleaned, moving vertically from top to

bottom with the suction function on.

During periods of particularly low temperatures, pre-heat the windows

emitting steam from about 50 cm away from the surface to be treated.

Recommended for cleaning fabric surfaces such as sofa joints, armchairs, mattresses, car seats,

etc..

With soft bristles for brushing delicate surfaces such as picture frames, books, etc..

The length of the telescopic suction tube can be adjusted from a minimum of 60 cm to a maximum

of 1 metre. To increase or decrease length, press the release button (IA) and extend or reduce

length as desired.

Then connect the telescopic suction tube (I) to the connecting accessories (A1) of the flexible hose

(A).

The telescopic suction tube can only be used in suction mode to vacuum

liquids and solids. Absolutely do NOT use in steam mode.

The parquet brush (L) is designed to clean delicate surfaces and has bristles and wheels in a ma-

terial specially developed not to damage the surfaces.

This accessory is suitable only for suction, and is ideal for cleaning woo-

den floors.

When Programme P2 is activated for parquet and terracotta floors, use the universal brush

NOTA

ATTENTION

PARQUET BRUSH (L)

ATTENTION

TELESCOPIC TUBE (I)

SUCTION BRUSH WITH SOFT BRISTLES (H)

UPHOLSTERY SUCTION NOZZLE (G)

ATTENTION

NOTE

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 58