Operation Manual

LECOASPIRA PROGRAM

ENGLISH

♦ The programmed mode allows you to choose from 4 preset cleaning programmes.

♦ Every programme is developed to automatically dispense, in sequence, the amount of steam

and suction power necessary to clean a specific surface.

♦ In programmes that envisage the use of the two functions, steam and suction, the suction fun-

ction starts automatically after the steam function and lasts in proportion to that of the steam,

enabling the surface treated to dry.

♦ The times that steam and suction are supplied have been carefully calibrated for various types of

surfaces and have been developed on surfaces with standard dimensions.

♦ When cleaning very large areas, at the end of the cycle it is possible to immediately restart the

programme by simply pressing the A5 key in order to complete the cleaning of the entire surface.

♦ Otherwise it is possible to finish the job in manual mode (see paragraph SET THE SUCTION LE-

VEL IN MANUAL MODE for the suction function or paragraph SET THE STEAM LEVEL IN MA-

NUAL MODE for the steam function).

If using with a programme, remember that the suction speed and the quantity of steam are

reset and therefore it is not possible to adjust them manually.

PRE-SET PROGRAMMES

NOTE

MANUAL PROGRAMME

RUGS/CARPETS

PARQUET / TERRACOTTA

UPHOLSTERY/WALL COVERINGS/CAR INTERIORS

SUCTION

HOW TO USE: PROGRAMMED

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 48