Operation Manual

LECOASPIRA PROGRAM

ENGLISH

♦ Turn on the boiler using the UP (4) key.

♦ The two indicators (8B) and (8F) start to flash.

♦ Select the steam pressure desired by pressing the UP (4) key again.

♦ In fact, every time the key is pressed, one of the steam pressure indicators goes on (8B) with a

resulting increase in the pressure of the steam being supplied.

♦ The DOWN (5) key performs the reverse function; in other words, every time the DOWN (5) key

is pressed there is a decrease in the steam pressure and the indicators go off (8B).

STEAM ADJUSTMENT

♦ After setting the level desired, wait until the indicators (8B) remain lit. This means that the pres-

sure of the steam corresponds to the one actually selected and the appliance is ready to be

used.

♦ Press the button (A5) on the handle to dispense steam over the surface to be cleaned.

♦ This turns the indicator light (8D) on.

♦ To stop the steam flow, simply release the button (A5).

The handle of the flexible hose (A2) is fitted with a safety button (A3) to prevent the acci-

dental activation of steam delivery by children or people who do not know how it works. Should the

appliance be left momentarily unguarded, move the safety button (A3) to the off position. To con-

tinue steam delivery, move the switch back to its original position.

When first operating it, there may be some drops of water mixed with the steam due to

imperfect thermal stabilization. We therefore recommend that the first jet of steam be directed onto

a rag.

You can use the steam and suction features at the same time, by activating them both as descri-

bed in the preceding paragraphs.

Strong steam 4 indicators lit to remove scale, stains, grease and sanitise

Normal steam

2 or 3

indicators lit

for carpets, rugs, glass, floors

Gentle steam 1 indicator on

to steam plants, clean delicate fabrics, wall coverings, sofas,

etc.

HOW TO USE: STEAM

HOW TO USE: STEAM + SUCTION

NOTE

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 47