Operation Manual

21
VAPORETTO go
TROUBLESHOOTING
PROBLEM SOLUTION
ON lamp (D) off Check that the plug is properly connected to the mains socket.
Ensure that the appliance has been turned on using the ON/OFF swit-
ch (C).
ON lamp (D) on but no steam
is delivered
Wait for the Steam pressure indicator lamp (E) to turn on (approx. 10
minutes). If even once the lamp (D) is on, steam is still not delivered,
there is no water in the boiler. Fill according to the instructions given in
the manual.
The safety cap cannot be
unscrewed
Ensure the machine is off and disconnected from the power supply
and enable the steam control lever (1A) on the steam sprayer (1C) un-
til the steam flow ceases (paragraph “SAFETY CAP / SHORTAGE OF
WATER”)
If the problem persists, unscrew the cap at the same time as applying
gentle pressure with fingers to the cap pin (see fig. D)
Fig. D
ENGLISH
VAPORETTO GO - M0S10515 - 1T05 PRELIMINARE_vers7:FEV 1000-950.qxd 05/07/2013 10.08 Pagina 21