Operation Manual

ENGLISH
| 18 |
• Do not touch or use the appliance bare-
foot and/or with wet body or feet.
• Do not use the appliance near contai-
ners full of water, e.g. sinks, baths and
swimming pools.
• Do not immerse the appliance, including
the power cable and plug, in water or
other liquids.
• Steam must not be directed towards
equipment containing electric or elec-
tronic components.
RISKS DURING USE OF THE PRODUCT –
INJURIES/SCALDING
• The product should not be used in areas
where there is a danger of explosions or
in the presence of toxic substances.
• Do not pour toxic substances, acids,
solvents, detergents, corrosive substan-
ces and/or explosives or perfumes into
the tank.
• Only pour water or the water mix indi-
cated in the Chapter “WHICH WATER
TO USE” into the tank.
• Do not direct the steam jet or the iron
onto toxic substances, acids, solvents,
detergents or corrosive substances. The
handling and removal of dangerous
substances must be carried out accor-
ding to the indications of the manufac-
turers of these substances.
• Do not direct the steam jet or the iron
onto explosive powders or liquids, hydro-
carbons, open flames and or extremely
hot objects.
• Keep all
body parts away from the va-
cuum intake and from any moving parts.
• Do not position the product near sour-
ces of heat such as fireplaces, stoves
and ovens.
• Do not obstruct the openings and grills
on the product.
• Do not direct the steam jet or the iron
on any part of the body of people or ani-
mals.
• Do not direct the steam jet or the iron
on clothes while they are being worn.
• Cloths and rags and fabrics which have
been subjected to a deep steam reach
very high temperatures, above 100°C.
Take care when handling the appliance.
• During use, keep the product in a hori-
zontal position on stable surfaces.
• To continue steam delivery, return the
switch to its original position.
• Iron only on supports that are heat resi-
stant and which allow the steam to per-
meate.
• When placing the iron on its stand,
make sure that the surface on which the
stand is placed, is stable.
• If the iron rest mat needs to be repla-
ced, only use original spare parts.
• The iron must be used and rested on a
stable surface.
• Do not place the hot appliance on heat-
sensitive surfaces.
• If ironing whilst sitting down, take care
to ensure that the jet of steam is not an-
gled towards your legs. Steam can scald.
preliminare VL SILENCE FRIENDLY 14.45-14.55-19.50-19.55 - M0S11301 - 1P09:UNICO 29/09/2015 12.09 Pagina 18