Operation Manual

VAPORELLA FOREVER 850 - 870 - 850 PRO - 855 PRO
13
ENGLISH
- If ironing whilst sitting down, take care to ensure that the jet of steam is not an-
gled towards your legs. Steam can scald.
- Before connecting the appliance to the current, ensure that the continuous steam
jet button is not pressed.
- Never leave the iron unattended when it is plugged in.
SAFETY WARNINGS:
using the appliance:
This appliance has been designed to work with normal tap water.
Absolutely do not use distilled water, dryer condensate water, perfumed water,
rain water, battery water, water from air conditioning systems and the like. Do not
use chemical substances or detergents.
- We recommend you use original Polti products only, as products of other brands
may not be suitable for use in Polti products and could cause damage.
- Never leave the appliance exposed to the weather.
- Do not place the appliance near a live element, an electric stove or any other
source of heat.
- Do not expose the appliance to temperatures under 0°C or over 40°C
- Press the buttons only with a finger, without excessive force and avoid using a
pointed object such as a pen.
- Do not wind the power cable around the appliance, especially when the ap-
pliance is still hot.
- To avoid prejudicing the safety of the appliance when repairing or replacing ac-
cessories, use only original spare parts.
- Let the appliance cool down before cleaning it.
- Before storing the appliance make sure that it has completely cooled down.
- It is necessary to keep the unit in horizontal position during operation.
- Always rest the appliance on a stable surface.
- Iron only on supports that are heat resistant and which allow the steam to per-
meate.
- If the iron rest mat needs to be replaced, only use original spare parts.
- The iron must be used and rested on a stable surface.
- When placing the iron on its stand, make sure that the surface on which the stand
is placed, is stable.
- Do not place the hot appliance on heat-sensitive surfaces.
VL FOREVER 850-870-850-855 PRO M0S10120 1T03 BOZZA:FEV 1000-950.qxd 25/03/2013 16.21 Pagina 13