Operation Manual

2. IRON TEMPERATURE ADJUST-
MENT
Before ironing an item of clothing, always
check the symbols on its label, for the instruc-
tions provided by the manufacturer.
Check, based on the following table, the most
appropriate type of ironing:
3. STEAM IRONING
3.1 Make sure that chapter 1 has been comple-
ted and regulate the temperature of the iron
(6)-(7) as described in chapter 2.
3.2 Wait for the “Steam Ready” indicator light
(7) and “Iron Heating” indicator light to turn off.
3.3 Press the steam button (10) on the iron to
make steam come out of the holes on the pla-
te. Releasing the button, the flow stops. Pro-
ceed to iron the garments.
3.4 Only for Vaporella Forever 609-610 to ha-
ve a continuous jet of steam, press and move
the continuous steam jet button backwards
(11). The steam will continue to come out even
when the button is released. To interrupt the
supply, move the steam button forward (11).
Only for Vaporella Forever 615 Pro to have a
continuous jet of steam move the the conti-
nuous steam jet button forward (12). The
steam will continue to come out even when
the button is released. To interrupt the supply,
move the button backward (12).
4. VERTICAL IRONING
It is possible to use the iron vertically to remo-
ve creases from fabrics and/or to freshen up
the fibres, eliminating possible residual
odours.
Hold the iron vertically, push the steam button
(10) and touch the fabric slightly with the so-
leplate, if the type of fabrics allows it.
5. DRY IRONING
5.1 Make sure that chapter 1 has been comple-
ted and regulate the temperature of the iron
(6)-(7) as described in chapter 2.
6. OUT OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank has been used
up, steam will stop being released.
To restart operations just fill the water tank
again as described in the chapter 1.
WARNING: This operation must always be
done after having disconnected the applian-
ce from the mains.
When ironing dry, pay attention not to press
the steam button, since water could leak
from the plate.
WARNING: Do not place the hot iron on any
surface. Vaporella is equipped with an iron
rest mat with soft non-slip inserts designed
to resist high temperatures.
The indicator lights “Iron heating” and “Steam
ready” turn on and off during use. This indica-
tes that the electrical resistor has started to
work to keep the pressure of the boiler
steady. This is a normal occurrence, and it is
therefore possible to continue ironing.
When first using the steam, there may be
some drops of water leaking out of the pla-
te, this is due to imperfect thermal stabiliza-
tion. We therefore recommend that the first
jet of steam be directed onto a cloth.
Divide the laundry according to the symbols
on the garment labels or according to the
kind of fabric. Always start ironing with the
garments that require the lowest tempera-
ture, in order to reduce the waiting times
and avoid the risk of burning the fabrics.
ATTENTION: For low temperature we do not
recommend the use of steam since water
could come out from the holes on the sole-
plate. For medium temperature alternate the
use of steam and dry ironing to avoid water
leaking from the holes on the soleplate.
High temperature – cotton, linen:
Set the iron temperature adjustment knob
to the position •••
Medium temperature – wool, silk:
Set the iron temperature adjustment knob
to the position ••
Low temperature – synthetic, acrylic, ny-
lon, polyester:
Set the iron temperature adjustment knob
to the position •
- Do not iron
- Steam ironing and steam treatment not
allowed
ENGLISH
| 22 |
VL FOREVER 609 - 610 - 615 - 1P05:FEV 1000-950.qxd 05/06/2015 13.44 Pagina 22