Operation Manual

Tips

In the event of external factors such as, for ex-

ample, a sudden change in voltage due to an

upset in the network (failure, lightning, etc.), the

device may be affected by electrical interference

and be subject to temporary malfunctioning.

To reset the device, switch it off and disconnect

it from the mains for a few minutes. After this

procedure, start it again normally. If it still does

not work correctly, ask for a check up at an au-

thorised service centre.

Having the device checked after a problem of

this kind is recommended.

External cleaning

For cleaning the outside of the device we recom-

mend using a damp cloth. Do not use solvents

or detergents as these could damage the sur-

faces.

Pay special attention to the cleanliness of the

outside of the device when moving from one

room to another, cleaning the wheels too.

WARNING: For all other maintenance proce-

dures and whenever necessary, contact an

authorised service centre. Do not attempt

under any circumstances to disassemble the

device or to open it.

The product has been fitted with anti-tamper

stickers.

The warranty will be invalidated if these

stickers are removed or damaged by non-au-

thorised personnel.

SANI SYSTEM EXPRESS

SANI SYSTEM EXPRESS M0S09441 1Q10_MODIFICATO_7:A5 19/05/2011 11.03 Pagina 31