Operation Manual

3. Getting Started With GPS Navigation and PolNav

This tutorial will get you started on using PolNav for navigation. Before you start, you

should ensure that the software has been installed and the necessary hardware

configured. Instructions for installation and configuration can be found in the Hardware

Configuration Section of this manual.

Step 1

Start PolNav and wait for your GPS receiver to obtain a position fix.

Press the center area on the touch screen to obtain the Main Menu, and press the Find

Button in the Menu.

If you do not have a GPS fix, or want to simulate a route, select a starting location

first using this tutorial up to Step 5, then select a destination using this tutorial a

second time.