Operation Manual

4
2.1.3 Device ID
To know your Device ID, entering Main Menu ->Info ->About
2.2 Hardware Configuration (PC/PDA Only)
After installing PolNav on your PC/PDA, please ensure your GPS hardware has been
correctly setup. For instructions on GPS hardware setup, please refer to your GPS
hardware manual. You will only need to do this once. Once the GPS hardware has been
setup, please take note of the Port Settings for your GPS. You will need this to
configure the settings in PolNav.
Press the Settings in the Main Menu and then press GPS Port. Now change the COM
Port and Baud Rate to the given values. The Baud rate is usually 4800 bps.