Operation Manual

41
11. GPS Settings
The GPS screen contains information about the current satellite coverage, current time,
longitude, latitude, altitude, quality of the signals received and the status of the GPS
receiver. To access the GPS Information page, press the GPS Button on the Main
Menu ->Info.
For the setting of the GPS Port and Baud Rate, please go to the Main Menu ->Setting
->GPS Port to set the GPS Port and Baud Rate.
When you run PolNav for the first time on your machine, you need to configure your
GPS settings. For more information, please read your GPS hardware instructions,
and the Hardware Setup section from this manual. Normally, you will only need to
configure your GPS hardware once.