Operation Manual

24
6.4 Setting Starting Locations/Clearing Routes/Setting Simulated
Starting Locations
By either selecting a location in the map screen or from Find menu, PolNav will enter
Location menu, in which you can set a start point for simulation purpose.
If you would like to plan a new route to a destination, you can use the Reset function to
delete the current route from memory. This works for both simulation and actual GPS
navigation. You can also use this function to select a new starting location for simulation.
If you are clearing a route then setting a new starting point, you need to do this twice.
6.5 Route Simulation
PolNav allows you to simulate the route to your destination without the need for GPS
fixes. Simply set a starting point and a destination point and intermediate
waypoints if needed. Instructions on selecting starting points/destinations can be found
in the Getting Started Section and the Find Menu.