PolNav Navigation Software User’s Manual Version 2008 Q1 For use with PC/PDA/Personal Navigators I
Polstar Technologies, Inc. http://www.polstargps.com Tel: +886-3-552-5279 Fax: +886-3-552-5269 Address: 5F-1 No.28 Taiyuan St, Jhubei City, Hsinchu County 30288, Taiwan © Copyright 2007 Polstar Technologies, Inc. All rights reserved. Polstar™, The RoadMentor™ Series, PolNav™, The Polstar™ Logo are registered trademarks of Polstar Technologies, Inc. in Taiwan and/or other countries.
Contents 1. INTRODUCTION .............................................................................................................................. 1 2. INSTALLATION AND HARDWARE SETUP ............................................................................... 2 2.1 SOFTWARE INSTALLATION ............................................................................................................. 2 2.1.1 Map code.........................................................................................
9.1.4 Unit ...................................................................................................................................... 33 9.1.5 Time Zone ............................................................................................................................ 33 9.1.6 Guidance.............................................................................................................................. 34 9.2 ADVANCED SETTINGS......................................................
1. Introduction Congratulations on purchasing the Polstar PolNav Navigation Software. PolNav is a state of the art navigation software designed to make your journey more efficient and productive.
2. Installation and Hardware Setup 2.1 Software Installation To run the software legally, the user has to get a license key by registration process. The license key is encrypted by the combination of the device ID, which could be your SD card ID, and a map code. Also, please note that the license key is per map region. Each map region has its own map code, and thus you should have different license key for each map region. E.g.
at the moment you run the software as below. Press OK to check the illegal map data you use, where a forbidden icon are shown below. To get a license key, you need to send the Device ID and the map code to the original distributor to request a legal license key to that map data once you have paid for it.
2.1.3 Device ID To know your Device ID, entering Main Menu ->Info ->About 2.2 Hardware Configuration (PC/PDA Only) After installing PolNav on your PC/PDA, please ensure your GPS hardware has been correctly setup. For instructions on GPS hardware setup, please refer to your GPS hardware manual. You will only need to do this once. Once the GPS hardware has been setup, please take note of the Port Settings for your GPS. You will need this to configure the settings in PolNav.
3. Getting Started With GPS Navigation and PolNav This tutorial will get you started on using PolNav for navigation. Before you start, you should ensure that the software has been installed and the necessary hardware configured. Instructions for installation and configuration can be found in the Hardware Configuration Section of this manual. Step 1 Start PolNav and wait for your GPS receiver to obtain a position fix.
Step 2 Press the Address Button in the Find Menu, the press the City/PostCode Button once you are in the Address Menu. Press the Region Name Tab to switch the country you are searching to Germany if you have not already done so. Step 3 Enter BERLIN on the onscreen keyboard and press the Done Button. Select the first entry in the Results Screen.
Step 4 Press the Street Center Button in the Location Menu, the press the Go To Button in the Street Center Menu to begin navigation. PolNav will calculate a route to the destination from your current location when you have a GPS fix. If you are selecting a starting location for simulation, press the Set Start Button (Demo) Button, and then return to Step 1 to find a destination and press the Go To Button once the destination has been found.
Step 5 You can begin using your GPS system if you have a GPS fix. If you do not have a GPS fix, you can use the Demo feature to simulate the route to your destination using Route > Start Demo. You can now drive to your destination, and you will be guided by voice commands at every turn and the Navigation Screen. For more information about advanced functions, please read the rest of this manual.
4. User Interface 4.1 Main Menu The Main Menu provides access to PolNav’s many features. You can access the Main Menu by pressing any where in the map screen. The following features can be accessed from the Main Menu.
4.2 Map Screen The Map Screen displays a map of your current location, as well as displaying nearby POIs and information. You can also use it as an electronic map. When in Navigation/Free Run Screen, by panning the map, you can enter the Map Screen. Note that if you’re using Heading-up in Navigation/Free Run Screen, then the Map Screen will follow the orientation. By click the North Indicator, the Map Screen will change to North-up. Once in North-up, it can’t return to Heading-up.
4.2.
4.3 Zoom In/Zoom Out You can change the scale of the electronic map by pressing the Zoom In/Zoom Out buttons. If you have a position fix, it will zoom in/out on your current location. If you are in panning mode, it will zoom in/out on the selected location marked by the red dot. Note: Local streets will not be displayed at large map scales. At large map scales, only the main roads and freeways will be displayed. To view them you must increase the map scale by zooming in. 4.
4.5 Location Menu You can select locations (POI Icons) or streets on the map by pressing the icon or location and pressing the Street/Place Information Panel. The Location Menu will then appear. The Location Menu will also appear when you select a location from the Find Menu.
4.6 Navigation Screen The Navigation Screen will appear whenever a route has been set. It is basically a Map Screen with additional information about the route, such as distance until next turn, travel time, and estimated time at arrival. The screen will be centred on your current location (when you have a GPS fix, or else simulation will move at a constant velocity). To exit the Guidance Screen, simply pan the map. To return to the Guidance Screen, press the Car Position.
4.7 Free Run Screen The Free Run Screen will appear whenever a route has NOT been set. It is basically a Map Screen with additional information about the current road/city you’re driving on, and driving speed. The screen will be centred on your current location (when you have a GPS fix). To exit the Free Run Screen, simply pan the map. To return to the Free Run Screen, press the Car Position.
5. Finding Destinations PolNav offers many methods to search for a particular destination. This is useful as you can pinpoint the search locations and minimising your search time. Once a destination has been found, the Location Menu will appear, and PolNav will calculate a route to the chosen destination when you press the Go To Button or the Add Via Button. You can also use the Find Menu to set a Starting Point for route simulation, as explained in the Getting Started Tutorial. 5.
5.2 By Points-of-Interest (POI) Main Menu ->Find ->POI ->City/Postcode You can search for POIs in a city or region. Points of Interest are local landmarks or interesting places, and are represented by icons on the Map Screen. To simplify searches, POI has been categorized. Once you have found the destination, PolNav will load the Location Menu.
Main Menu ->Find ->POI ->Hot Points You can search for POIs with national importance within the country. Search results are then categorised into their respective regions for convenience. Once you have found the destination, PolNav will load the Location Menu.
Main Menu ->Find ->POI ->Near Car List the nearest 300 POI from your current location (only available when you have a GPS fix). Once you have found the destination, PolNav will load the Location Menu. Main Menu ->Find ->POI ->Near Cursor List the nearest 300 POIs from the cursor. Once you have found the destination, PolNav will load the Location Menu.
5.4 By Recent Destinations Main Menu ->Find ->Recent PolNav stores and lists the 50 destinations that were previously in sequential order for convenience should you decide to revisit the same place in the future. 5.5 By GPS Coordinates Main Menu ->Find ->Coordinates You can enter GPS coordinates of a location if it is known. The following notation is used to input latitude and longitude coordinates: E 121°0’5.2’’ and N 24°47’30.1’’.
5.6 Entering Information When performing searches, you will be prompted with the onscreen keyboard to enter keywords for the search. You can alternate between alphabetical letters (ABC) and numbers/symbols (123) by pressing the Switch Button. 5.7 Searching in Different Countries If you want to change the country you are searching, press the Country Name Tab when in one of the Submenus of the Find Menu: Note: Before you can search for places in a country, you must have the map of the region.
6. Advanced Routing Features 6.1 Making Detours Route ->Turn List ->Select the street or location ->Detour The route is recalculated to take a detour around the location or street.
6.2 Adding Intermediate Waypoints Map Screen ->Select a location ->Location Menu ->Add Via Or Main Menu ->Find ->Find a destination ->Location Menu ->Add Via You can add additional waypoints en route to your destination by using the Add Via Button. Simply find a destination using the Find Menu or by selecting it from the Map Screen. Once in the Location Menu, press the Add Via Button. This location will be placed between your starting/current and final destination.
6.4 Setting Starting Locations/Clearing Routes/Setting Simulated Starting Locations By either selecting a location in the map screen or from Find menu, PolNav will enter Location menu, in which you can set a start point for simulation purpose. If you would like to plan a new route to a destination, you can use the Reset function to delete the current route from memory. This works for both simulation and actual GPS navigation. You can also use this function to select a new starting location for simulation.
6.6 Changing Routing Options Please refer to the Route Settings Section, under the Configuring the PolNav Section of this Manual.
7. Route Management 7.1 Route information Main Menu ->Route ->Detail It includes information such as the distance remaining until next waypoint, travel time and arrival time. 7.2 Turn List Main Menu ->Route ->Turn List The Turn List is a list of all corners and roundabouts (turns) you will pass on the way to your destination. To view a turn, press its panel on the Turn List. This will load a map showing the location of the turn.
7.3 Itinerary List Map Screen ->Route ->Itinerary The Itinerary List is a list of user defined intermediate waypoints you can set on the way to your destination. Press the Change Button, you delete waypoints or adjust the sequence of the waypoints. To add waypoints, press the Add Button.
8. Managing Favourites, Itineraries and Trails 8.1 My Favourites Main Menu ->Settings ->My Data ->My Favourite You can edit your Favourite destinations by accessing the My Favourites Menu. You can add the places of Favourites.
8.2 My Itinerary Main Menu ->Settings ->My Data ->My Itinerary You can retrieve a planned itinerary by pressing Load Button. After having a loaded itinerary (current itinerary), you can add, edit or save the itinerary. If a route already exists before you retrieve an itinerary, a warning message will be shown. 8.3 My Trail Main Menu ->Settings ->My Data ->My Trail You can show a trail on the map screen by pressing Show Button. Show/Hide is toggled.
8.4 Clear Data Main Menu ->Settings ->My Data ->Clear Data You can clear the data you have saved here.
9. Configuring the PolNav To change the software settings, press the Settings button on the Main Menu. PolNav offers a high degree of personalisation settings, as well as normal system settings. You can access these settings from the Main Menu ->Settings Menu. 9.1 General Settings Main Menu ->Settings Menu ->General 9.1.1 Volume Main Menu ->Settings Menu ->General ->Sound You can adjust the volume of the voice prompts and sound effects here, as well as enabling sound/disabling sound.
9.1.2 Display Options Main Menu ->Settings Menu ->General Settings ->Display The Display Menu allows you to change the display features used by PolNav. You can adjust the colour scheme to suit your current lighting conditions for ease of visibility, the 3D view angle and font size. The Automatic Colour Scheme Mode changes the colour scheme automatically at sunrise and sunset each day. 9.1.
9.1.4 Unit Main Menu ->Settings Menu ->General ->Unit The Unit Menu allows you to change Unit Settings of PolNav for use in different countries. You can change the measuring units (distance) and time settings. 9.1.5 Time Zone Main Menu ->Settings Menu ->General Settings ->Time Zone The Time Zone Menu allows you to adjust the time displayed by PolNav for the area or country you are currently in. This is useful if you are in a country that adopts daylight saving.
9.1.6 Guidance Main Menu ->Settings Menu ->General ->Guidance The Guidance Menu allows you to adjust the Map Orientation, Auto Zoom, Approaching View, Turn PIP.
9.2 Advanced Settings Main Menu ->Settings Menu ->Advanced 9.2.1 Safe Mode Main Menu ->Settings Menu ->Advanced Settings ->Safe Mode By enabling “Safe mode”, the touch screen function will be disabled when the vehicle speed is above 40km/hr. This is to prevent drivers from operation of navigation devices. The touch screen function will be normal once the vehicle speed is below 40km/hr.
9.2.2 Speed Alert Main Menu ->Settings Menu ->Advanced Settings ->Speed Alert You can enable speed alerts, which will warn you when you exceed the speed alert velocity. 9.2.3 POI Icon Main Menu ->Settings Menu ->Advanced Settings ->POI Icon You can reveal, hide all or just some POI icons for ease of visibility on the Map Screen. Select the icons you wish to have displayed or hidden on the Map Screen, then press the Done Button.
9.2.4 Factory Default Main Menu ->Settings Menu ->Advanced Settings ->Factory Default If you are unhappy with the changes you have made to PolNav, you can restore the Factory Default Settings and start again. 9.3 Route Options Main Menu ->Settings Menu ->Route Options 9.3.1 General Main Menu ->Settings Menu ->Route Options Route options take your preferences into account when calculating the route to your destination.
Vehicle Type: Car, Bicycle, Walker can be selected. Routing Method: Shorter (distance), Faster (time), Economic (heuristic) routing algorithm can be applied. Avoid Highway: Highway won’t be considered as route solutions. Avoid Minor Road: Minor roads in communities or paved for walker won’t be considered as route solutions. Ignore Traffic Rule: one-way or maneuver traffic rules won’t be considered as route solutions. Avoid Toll Roads: the route won’t take roads with tollbooth as solutions.
10. Information The Information Menu gives you information about your route, itineraries, destinations, locations and maps. 10.1 GPS Access information about satellite coverage, current time, longitude, latitude, altitude, quality of the signals received and the status. 10.2 Statistics Access information about your current location, heading, velocity, time, etc.
10.3 Map Access information about the maps your PolNav is using, and what maps you have available. Maps are required before you can navigate the area. Note you should have the license key to use the map data. 10.4 About Access information about PolNav, version number, memory usage etc.
11. GPS Settings The GPS screen contains information about the current satellite coverage, current time, longitude, latitude, altitude, quality of the signals received and the status of the GPS receiver. To access the GPS Information page, press the GPS Button on the Main Menu ->Info. For the setting of the GPS Port and Baud Rate, please go to the Main Menu ->Setting ->GPS Port to set the GPS Port and Baud Rate.
12. Disclaimer Polstar Technologies, Inc. takes no responsibility for any use of this product that may result in law violation and/or accidents leading to personal injuries and/or property damage. It is the user’s own responsibility to operate the product in a prudent manner that will comply with the law. Polstar will take no responsibility for the consequences caused by inaccurate satellite transmissions.
