User Manual

6
For the best recording results, the microphone should point directly at the sound source.
Vocalists and announcers should be positioned approximately 6 to 12 inches from the microphone. For close
vocal miking, use the included pop lter to prevent vocal pops or plosives.
To attach the pop lter, snap it onto the stem just below the mic capsule, and make sure it’s directly in front of
the microphone.
HIGH-PASS FILTER AND -10 DB PAD
High-Pass Filter
To prevent low-end rumble like noise from air conditioners, ducts, fans, and room ambience, use the
included key to move the switch to the position and activate the lter.
-10 dB Pad
The -10 dB pad provides 10 dB of attenuation for high-volume sources that can produce distortion like
singers, live speeches, or band rehearsals. Use the key tool to move the switch to the -10 dB position and