User's Manual

THE WINDSCREENS
The MVP-3 comes with a foam windscreen to reduce
wind noise in a light breeze, and a wind muff for
minimizing wind noise in moderate breezes.
Fit the windscreen or wind muff onto the microphone
by rotating the windscreen while gently pushing it
onto the microphone barrel. Make sure that the
windscreen or wind muff covers all the ports on the
sides of the microphone barrel.
DSLR MOUNTING AND OPERATING
THE MVP-3
1.Rotate the shock mount’s locking wheel
counterclockwise to loosen it.
2.Slide the mounting foot all the way into your
camera’s hot shoe.
3.Rotate the locking wheel clockwise until secure.
4.If needed, place the foam windscreen or wind muff
onto the microphone, and press the MVP-3 into the
shock-mount suspenders.
5.Plug the smartphone audio cable or the camera
audio cable into the microphone’s 1/8 in. output,
and plug the other end to the 1/8 in. audio input
jack on the recording device or camera.