User Manual
9
Using the Link Feature:
The HPA-4X2 circuitry allows daisy chaining headphone ampliers in case
more than four headphone connections are needed. To link the HPA-4X2 to
another headphone amplier do the following:
If using a ¼" stereo TRS for input: Connect the RCA plugs on the back panel
of the HPA-4X2 to the input of the daisy-chained headphone amplier.
If using the RCA jacks for input: Connect the ¼" TRS stereo jack of the
HPA-4X2 to the inputs of the daisy-chained headphone amplier.
Note: Depending on what headphone amplier you are connecting to, you may
need a 2 RCA male to ¼" TRS stereo Y-cable or Y-adapter to do this.
RCA INPUT
TRS INPUT
RCA DAISY CHAIN
TRS DAISY CHAIN