Data Sheet

Target minimum
Offset 0x2A
Type signed 32-bit
Default −200
Range −2,147,483,647 to 0
Settings file output_min
Tic Control
Center
Input and motor settings tab, RC and analog scaling box, Target column,
Minimum
This is one of the RC/analog input scaling parameters described in Section 5.2.
Target maximum
Offset 0x32
Type signed 32-bit
Default 200
Range 0 to 2,147,483,647
Settings file output_max
Tic Control
Center
Input and motor settings tab, RC and analog scaling box, Target column,
Maximum
This is one of the RC/analog input scaling parameters described in Section 5.2.
Encoder prescaler
Offset 0x58
Type unsigned 32-bit
Default 1
Range 1 to 2,147,483,647
Settings file encoder_prescaler
Tic Control Center Input and motor settings tab, Encoder box, Prescaler
Tic Stepper Motor Controller User’s Guide © 2001–2018 Pololu Corporation
6. Setting reference Page 95 of 150