Manualshelf

Data Sheet

ManualsBrandsPololu ManualsStepper Motor ControllersT834 USB Multi-Interface 2.5-10.8V, 1.5A Stepper Motor Controller (Soldered)
919293949596979899100
Input minimum
Offset 0x22
Type unsigned 16-bit
Default 0
Range 0 to 4095
Settings file input_min
Tic Control
Center
Input and motor settings tab, RC and analog scaling box, Input column,
Minimum
This is one of the RC/analog input scaling parameters described in Section 5.2.
Input neutral minimum
Offset 0x24
Type unsigned 16-bit
Default 2015
Range 0 to 4095
Settings file input_neutral_min
Tic Control
Center
Input and motor settings tab, RC and analog scaling box, Input column, Neutral
min
This is one of the RC/analog input scaling parameters described in Section 5.2.
Tic Stepper Motor Controller User’s Guide © 2001–2018 Pololu Corporation
6. Setting reference Page 93 of 150