Manualshelf

Data Sheet

ManualsBrandsPololu ManualsServo Motor Tools & PartsPololu RC Switch w/ Digital Output
26272829303132333435
3. Tap the learning mode jumper (connect it and then disconnect it). The indicator LED should be blinking with
a 50% duty cycle and a period of 0.5 to indicate that there is no signal being received. If you see it doing a pattern
where it fades in and then blinks, then you are still sending pulses to the device. You should figure out how to
stop sending pulses, and start over at step 1.
4. Tap the learning mode jumper again. The LED should now be fading in repeatedly with a period of 1 s.
5. Tap the learning mode jumper again. The LED should start fading out repeatedly with a period of 1 s.
6. Power off the device to exit learning mode.
Pololu RC Switch User’s Guide © 2001–2015 Pololu Corporation
9. Configuring Your RC Switch Page 35 of 35