Data Sheet

Pololu RC Switch with Relay, bottom view with dimensions.

Included hardware

The Pololu RC Switch with Relay is available in two versions:

• The assembled version [https://www.pololu.com/product/2804] ships with the 5V Omron relay, header pins, and

terminal block soldered in. A 1×2-pin male header and a shorting block are also included with the assembled

version and can be used together as a tool when configuring the device. The assembled version can be

incorporated into an existing RC system without the need for any additional soldering.

• The partial kit version [https://www.pololu.com/product/2805] gives you the flexibility to choose different

connections. It includes a 5V Omron relay, 0.1″ 12-pin male header, a 0.1″ 12-pin right-angle male header, a

3-pin terminal block, and a shorting block. The headers can be broken into smaller pieces and optionally soldered

to the board, or wires can be soldered directly to the board for the most compact installation.

Warning: When soldering the terminal block into the partial kit version, be sure to use the larger set

of holes. If you use the smaller holes, which are intended for 0.2″ male header pins, there will not be

enough space to mount the relay.

5. RC Switch with Relay Page 20 of 35