Owner's manual

Hardware included with the Orangutan SVP partial kit.

• Six 3×4 male header blocks

• Six 3×4 female header

blocks

[http://www.pololu.com/catalog/

product/1034]

• One 3×7 male header block

• One 3×7 female header block

• Three 2-pin 3.5mm terminal

blocks

• Five blue shorting blocks

[http://www.pololu.com/catalog/

product/968]

• Two 2×3 female header

blocks

[http://www.pololu.com/catalog/

product/1023]

• One 2×3 shrouded box

header [http://www.pololu.com/catalog/product/854]

• One 2×8 shrouded box header [http://www.pololu.com/catalog/product/898]

• One buzzer

• Five pushbuttons [http://www.pololu.com/catalog/product/1400]

• One 2×20 breakaway male header [http://www.pololu.com/catalog/product/966]

• One 1×20 breakaway male header [http://www.pololu.com/catalog/product/965]

• Five 1×2 female header blocks [http://www.pololu.com/catalog/product/1012]

• Two single-pin female headers

The labeled photo below shows possible locations for installing these parts:

5. Getting Started Page 20 of 37