Manualshelf

Data Sheet

ManualsBrandsPololu ManualsMotor ControllersPololu RC Switch with Small Low-Side MOSFET (3A)
11121314151617181920
Configuration interface
The learning mode jumper on both the top and bottom of the board can be used to get the device
into learning mode and configure it. The configuration procedure is described in Section 9.
Pololu RC Switch with Small Low-Side MOSFET,
bottom view with dimensions.
Included hardware
A 12-pin 0.1″ straight breakaway male header [https://www.pololu.com/product/965] is included with the
Pololu RC Switch with Small Low-Side MOSFET. The header pins can be soldered in and used
to connect the RC switch to perfboards or breadboards [https://www.pololu.com/category/28/solderless-
breadboards].
Pololu RC Switch User’s Guide © 2001–2017 Pololu Corporation
3. RC Switch with Small Low-Side MOSFET Page 13 of 45